Double Station Insert Tube and Expanding Machine for Aluminum Tubes and Fins Expansion
It is composed of a sheet discharging die and a discharging device, a sheet pressing device, a positioning device, an expansion rod expansion and guiding device, a sheet discharging workbench, an expansion rod workbench and an electric control device.
| Material of the expansion rod | Cr12 |
| material of the insert mold and the guide plate | 45 |
| Drive | hydraulic + pneumatic |
| Electric control system | PLC |
| The length of the required insert | 200mm-800mm. |
| Film distance | According to the requirements |
| Width of row | 3 layers and eight and a half rows. |
| Configuration motor power | 3KW |
| Air source | 8MPa |
| Power source | 380V, 50Hz. |
| Material grade of the aluminum tube | 1070/1060/1050/1100, with a status of "0" |
| Aluminum tube material specification | nominal outer diameter is Φ 8mm |
| Aluminum tube elbow radius | R11 |
| Aluminum tube nominal wall thickness | 0.6mm-1mm (including internal tooth tube) |
| Material grade of fins | 1070/1060/1050/1100/3102, status "0" |
| Fin width | 50mm, 60mm, 75mm |
| Fin length | 38.1mm-533.4mm |
| Fin thickness | 0.13mm-0.2mm |
| Daily output: | 2 sets 1000 sets/single shift |
| Weight of the whole machine | about 2T |
| Approximate size of equipment | 2500mm×2500mm×1700mm |