Indoor Unit Assembly Conveyor Line for Air Conditioner

Short Description:

The indoor unit assembly line includes Automatic belt line, Automatic roller line(Packing area), lighting + fan + process guide card hanging bracketair + circuit ) for conveyor line, Silence test room, Power outlet conveyor, Power supply and control system for conveyor line.

Total length 62m, width 600mm.

Send email to us

Product Detail

Product Tags

Parameter

		Parameter (1500pcs/8h)
Item Group	Item	Specification	Unit	QTY
Automatic belt line	Automatic belt line	W600×H750 automatic belt line with CPG motor	m	50
	Drive device	1.5KW reducer (CPG)	set	5
	Tensioning device	Match with 1.5kw driving	set	5
Automatic roller line(Packing area)	Automatic roller line	L=3M,W600xH750mm, Adopt automatic Galvanized roller conveying.	m	12
	Drive device	0.4kw reducer (CPG)	set	4
	Tensioning device		set	4
lighting + fan + process guide card hanging bracketair + circuit ) for conveyor line	Gas path	Pipeline buried into the line body, install 1 inch and a half main road under the station.	m	62
	Quick connector	The pipeline enters the line body along the ground, covered with herringbone steel plate for protection, and 1 inch main pipe of compressed air is installed on and below the station, with an interval of 3 meters and a 4-branch pipe (local interval of 1.5 meters).	set	31
	Globe valve	Install brass globe valve, elbow and three station quick connector on each branch.	set	31
	Air source triplex	Pneumatic triad	set	1
	Gas group of slides	Made of special aluminum profiles	m	58
	Illumination	The upper part of the line body is equipped with a double row of 16 ~ 18 watt LED energy-saving fluorescent lamp with reflective panel (the roof of the room is not required). The space between each two fluorescent lamps is 0.5 meters, the distance between the tubes is 200mm, the height is 2.6 meters above the ground, and the distance between the lamplight and the edge of the line body is 500mm. The overall lighting is controlled by sections along with the line.	m	58
	Lamp support		m	58
	Fan	Adopt 400mm moving head fan domestic quality brand, and provide support and socket. Install every 2 meters	set	29
Silence test room		L4mW3mH3.0m,The silent wall of the house is 200mm thick. The four-storey structure	set	1
Power outlet conveyor		L10mW0.4mH0.7m, iron material, slat type,3-phase, 230V/60Hz Equip with 28pcs power receptacle with grounding Panasoinc(15A-250V), SPACED EVERY 0.5M. one set 0.75KW motor .	m	10
Power supply and control system for conveyor line		Schneider AC contactor + button, button box is cast aluminum structure, photoelectric switch is Panasonic or Omron.Signal line and motor power line are all directly connected by cable.	set	1