Robus Tailpipe Bending Machine Outlet Pipe for Aluminum Tube Bending in Evaporators
1. This equipment is used for aluminum tube bending at the tail of the evaporator. The complete set of equipment mainly consists of a bed, a bending wheel, etc.
2. The bed adopts a profile box design, and the positioning pin adopts a waist hole, which can meet the bending needs of evaporators of different sizes and shapes.
3. Design different types of bending machines based on different product models and pipe shapes.
4. The aluminum tube is bent using a servo motor driven synchronous belt.
5. Suitable for bending aluminum tubes with 1-4 bends.
| Model | TTB-8 |
| Pipe fittings outer diameter range | Φ6.35-8.5mm |
| Efficiency | 20~40 sec |
| Operating mode | Automatic/manual/point action |
| Voltage | 380V 50Hz |
| Air pressure | 0.6~0.8MPa |
| Thickness | 0.5-1mm |
| Control system | Touch screen、PLC |
| Drive mode | Servo motor、pneumatic |
| Power | 1.5kw |
| Component | Frame clamping device, moving device, bending deviceElectronic control operating system |
| Weight | 260KG |
| Diamension | 2300*950*900mm |
