Intelligent Pipe Prefabrication Solutions
Product Overview
Pipe prefabrication brings the cutting, assembly and welding of pipe spools into the workshop ahead of site installation. A pipe spool is a preassembled section of piping made from pipe lengths and, where required, fittings such as elbows, tees and flanges. Depending on the configuration, the production line can link material storage and feeding with cutting, end preparation, fit-up, welding, nondestructive testing and transfer to finished-spool storage.
For data center mechanical piping and other industrial projects, line selection starts with the spool drawings and bill of materials. Pipe diameter and wall thickness guide cutting and beveling equipment selection. Fitting geometry determines how components are held and positioned, while the welding procedure and inspection plan determine which downstream stations are needed.
Pipe Prefabrication Solutions
Fully Automated Pipe Prefabrication Solutions
1. Module-Based Pipe Prefabrication Line
Dedicated modules hold fittings in a defined position for storage, transfer and assembly. Depending on the layout, gantry handling equipment and automated guided vehicles can move materials between stations. Laser vision and robotic equipment support fit-up, grinding and welding, and digital weld inspection can be integrated downstream.
For selection, review the fitting types in your spool drawings. Their size, shape and orientation determine the carrier design and how the fit-up and welding stations receive each workpiece.
2. Pallet-Based Pipe Prefabrication Line
Dedicated pallets carry fittings from storage through loading and processing. The line can integrate pallet storage and retrieval, gantry handling, fit-up, welding and inspection. How the fitting sits on the pallet determines how each station receives, locates and clamps it.
Review the fitting geometry, pallet requirements and transfer points between storage and fabrication when selecting the line layout.
3. Automated Processing Line for Small- and Medium-Diameter Pipe
This configuration processes straight pipe and can integrate code scanning, length measurement, storage, marking, cutting, end beveling and grinding. The production layout depends on whether the required output is individual prepared pipe lengths or longer sections joined from straight pipe.
· Pipe Cutting & Beveling prepares straight pipe to the specified length and end profile for downstream fabrication.
· Pipe-to-Pipe Joining aligns and welds straight pipe lengths where the production plan calls for longer sections.
Share the incoming pipe lengths, pipe size range, cut list and target output when selecting a configuration.
Semi-Automated Pipe Prefabrication Solutions
1. Front-End Automation
2. Core-Process Automation
3. QR Code-Based Program Selection
4. Combined Automation
Compare Line Configurations
| Configuration | Selection factor | Automation scope / | Information to provide |
| Module-Based Line | Dedicated fitting modules | Handling, fabrication and inspection as configured | Fitting types, spool drawings and output |
| Pallet-Based Line | Palletized fitting storage and transfer | Pallet handling, fabrication and inspection as configured | Fitting geometry, pallet requirements and material flow |
| Small- and Medium-Diameter Pipe Processing | Cutting and beveling or pipe-to-pipe joining | Automated feeding and straight-pipe processing | Pipe sizes, stock lengths and cut list |
| Front-End Automation | Pipe preparation before assembly | Storage, cutting, beveling and transfer | Preparation volume and downstream handoff point |
| Core-Process Automation | Selected operations on shared equipment | QR code-based program selection at configured stations | Operations to automate, existing equipment and operator tasks |
| Combined Automation | Linking preparation with downstream fabrication | Automated front end plus selected downstream operations | Workshop layout, spool mix and output |
Core Equipment
● TIG & SAW Welding Centers
| Model | Function | Listed Working Range |
| SPIWC-12Ad | Pallet-based robotic SAW center for fill and cap passes | DN 50–300,3–20 mm / 3–20 mm wall thickness |
| SPIWC-12Ac | Pallet-based dedicated SAW center for fill and cap passes | DN 50–300,3–20 mm / 3–20 mm wall thickness |
| CPAWM-24Ba | Semi-automated TIG and SAW center with QR code-based program selection and operator-assisted seam location and torch setup | DN 50–600,5–60 mm / 5–60 mm wall thickness |
Automated Storage & Material Handling
| Storage system | Workflow |
| Straight Pipe Storage | Inclined or step-feed racks support first-in, first-out retrieval. Horizontal racks can be configured for batch handling or single-pipe retrieval. Selected pallet racks provide manual retrieval. |
| Pipe Fitting Storage | Rectangular or cylindrical racks store loaded and empty modules or pallets. Individual carrier retrieval supplies elbows, tees, flanges and other fittings to the next station. |
| Prefabricated Spool Storage | Large or small spool pallets hold completed assemblies. Individual pallets can be stored and retrieved as spools are released for dispatch or installation. |
Applications
1. Data Center Mechanical Piping
Prepare straight runs and welded spools for data center mechanical piping packages. For cooling-water piping, confirm the material, joint design and inspection requirements from the project drawings before selecting the line. Where installation is phased, the drawings and material list can guide fabrication batches and finished-spool staging.
2. Petrochemical & Industrial Equipment Piping
Fabricate straight pipe runs and spool assemblies for process piping or equipment connections. The mix of pipe sizes and fittings determines how workpieces are carried and clamped. The welding and inspection requirements determine which stations are included in the line.
3. Shipbuilding & Offshore Piping
Prepare pipe runs and spool assemblies in the workshop ahead of onboard or offshore installation. Where dimensions and fitting orientations vary across spools, evaluate fixture access, transfer routes and handling requirements between stations.
4. Commercial Building Mechanical Piping
Prepare pipe lengths and fabricate spools for building mechanical services. Front-end automation can supply cut and beveled pipes to existing welding stations. A combined configuration can also automate selected fit-up and welding operations.





